本文主要研究内容
作者（2019）在《Evaluation and Optimization of Old Magzines Deinking Process of a Modified Lignin Sulfonates Deinking Agent》一文中研究指出：Deinking is an important process in waste paper recycling process, and this study mainly focuses on the properties of the deinking agent and process optimization. DIA-30 prepared in our laboratory, and FS and LD, were the three representative deinking agents studied herein. Brightness, effective residual ink concentration（ERIC）, dirt, macro-stickies, fiber loss during repulping, flotation, and washing processes were measured to evaluate the performance of the deinking agents and optimize process conditions. Each of the deinking agents exhibited different advantages: DIA-30 was optimal for deinking efficiency, brightness enhancement, as well as dirt and macrostickies removal, whereas LD was optimal for ink removal during flotation process but performed poorly in terms of brightness enhancement. FS showed a relatively balanced performance compared to those of DIA-30 and LD in the deinking process, but DIA-30 is the best option for deinking due to its outstanding comprehensive properties. The optimal repulping conditions for the deinking of 100% old magzines（OMG） using DIA-30 are as follows: repulping temperature, 60℃; pulp consistency, 13 wt%; repulping time, 20 min; H2O2 dosage, 0.5 wt%（oven-dried pulp）; NaOH dosage, 1.2 wt%（oven-dried pulp）; Na2SiO3 dosage, 0.3 wt%（oven-dried pulp）; and optimum DIA-30 dosage, 0.1 wt%.
Abstract
Deinking is an important process in waste paper recycling process, and this study mainly focuses on the properties of the deinking agent and process optimization. DIA-30 prepared in our laboratory, and FS and LD, were the three representative deinking agents studied herein. Brightness, effective residual ink concentration（ERIC）, dirt, macro-stickies, fiber loss during repulping, flotation, and washing processes were measured to evaluate the performance of the deinking agents and optimize process conditions. Each of the deinking agents exhibited different advantages: DIA-30 was optimal for deinking efficiency, brightness enhancement, as well as dirt and macrostickies removal, whereas LD was optimal for ink removal during flotation process but performed poorly in terms of brightness enhancement. FS showed a relatively balanced performance compared to those of DIA-30 and LD in the deinking process, but DIA-30 is the best option for deinking due to its outstanding comprehensive properties. The optimal repulping conditions for the deinking of 100% old magzines（OMG） using DIA-30 are as follows: repulping temperature, 60℃; pulp consistency, 13 wt%; repulping time, 20 min; H2O2 dosage, 0.5 wt%（oven-dried pulp）; NaOH dosage, 1.2 wt%（oven-dried pulp）; Na2SiO3 dosage, 0.3 wt%（oven-dried pulp）; and optimum DIA-30 dosage, 0.1 wt%.
论文参考文献
论文详细介绍
论文作者分别是来自Paper and Biomaterials的，发表于刊物Paper and Biomaterials2019年01期论文，是一篇关于,Paper and Biomaterials2019年01期论文的文章。本文可供学术参考使用，各位学者可以免费参考阅读下载，文章观点不代表本站观点，资料来自Paper and Biomaterials2019年01期论文网站，若本站收录的文献无意侵犯了您的著作版权，请联系我们删除。