本文主要研究内容
作者孟晓凯,赵春旺（2019）在《Effect of Dy Addition on the Microstructure and Mechanical Property of Ti-Nb-Dy Alloys》一文中研究指出：The effects of adding rare-earth element Dy on the microstructure, hardness, and elastic modulus of Ti78-xNb22Dyx（x=0.7, 2, and 5） alloys were investigated experimentally. The microstructure of Ti78-xNb22Dyx alloys consists of matrix（β phase and α″ martensite） and Dy-rich precipitates. The hardness can be increased with adding an appropriate amount of Dy. The elastic modulus decreases gradually with the increase of Dy fraction.
Abstract
The effects of adding rare-earth element Dy on the microstructure, hardness, and elastic modulus of Ti78-xNb22Dyx（x=0.7, 2, and 5） alloys were investigated experimentally. The microstructure of Ti78-xNb22Dyx alloys consists of matrix（β phase and α″ martensite） and Dy-rich precipitates. The hardness can be increased with adding an appropriate amount of Dy. The elastic modulus decreases gradually with the increase of Dy fraction.
论文参考文献
[1].α′TypeTi-Nb-Zralloyswithultra-lowYoung′smodulusandhighstrength[J]. Qing Liu,Qingkun Meng,Shun Guo,Xinqing Zhao. Progress in Natural Science:Materials International.2013(06)[2].Microstructural analysis of the softened zone in the welding joint of 100 kg class hot-rolled extra-high-strength steel[J]. WANG Haitao,QU Zhaoxia,XU Lei. Baosteel Technical Research.2013(03)[3].Microstructure and properties of Cu–Ti–Ni alloys[J]. Jia Liu,Xian-hui Wang,Ting-ting Guo,Jun-tao Zou,Xiao-hong Yang. International Journal of Minerals Metallurgy and Materials.2015(11)[4].Effect of Fe2B boride orientation on abrasion wear resistance of Fe-B cast alloy[J]. Da-wei Yi,Jian-dong Xing,Han-guang Fu,Zhi-yun Zhang,Jin Chen,jian-jun Zhang,Jian-hong Peng,Yu-pu Shi. China Foundry.2017(04)[5].EMPIRICAL RELATIONSHIP BETWEEN RECOVERABLE STRAIN ENERGY AND TEMPERATURE FOR TiNi AND TiNiCu ALLOYS[J]. LI Yongsen JIN Yongbai YU Ronghai Institute of Metal research,Academia Sinica,Shenyang,China Associate Professor,Institute of Metal Research,Academia Sinica,Shenyang 110015,China. Acta Metallurgica Sinica(English Edition).1993(01)[6].Tribological Properties of Mo-N Hard Coatings on Ti6A14V by Double Glow Discharge Technique[J]. Xiuyan LI Bin TANG, Junde PAN Daoxin LIU and Zhong XU1) Surface Engineering Institute, Taiyuan University of Technology, Taiyuan 030024, China2) Civil Aviation Engineering College, Northwestern Polytechnical University, Xi’an 710072, China. Journal of Materials Science & Technology.2003(04)[7].INFLUENCE OF CARBON CONTENT OF MARTENSITE STEELS ON HARDNESS RE-DISTRIBUTION NEAR WORN SURFACE[J]. Y.P. MaSchool of Metallurgy, Xi’an University of Architecture & Technology, Xi’an 710055, China Manuscript received 5 November 2001; in revised form 30 January 2002. Acta Metallurgica Sinica(English Edition).2002(04)[8].Strain glass in defect-containing ferroelastic Ti44Ni51Nb5alloy[J]. Guang-Yue Liao,Bin Chen,Qing-Kun Meng,Min-Juan Wang,Xin-Qing Zhao. Rare Metals.2015(12)[9].Effect of Mn on hardenability of 25CrMo axle steel by an improved end-quench test[J]. *Zhang Yutuo 1,Bian Shu 1,and Han Weixin 2(1.Shenyang Ligong University,Shenyang 110159,China;2.Institute of Metal Research CAS,Shenyang 110016,China). China Foundry.2012(04)[10].Effects of Austenizing Time on Wear Behavior of D6 Tool Steel After Deep Cryogenic Treatment[J]. A Akhbarizadeh,M A Golozar,A Shafeie,M Kholghy. Journal of Iron and Steel Research(International).2009(06)
论文详细介绍
论文作者分别是来自Journal of Wuhan University of Technology(Materials Science)的孟晓凯,赵春旺，发表于刊物Journal of Wuhan University of Technology(Materials Science)2019年04期论文，是一篇关于,Journal of Wuhan University of Technology(Materials Science)2019年04期论文的文章。本文可供学术参考使用，各位学者可以免费参考阅读下载，文章观点不代表本站观点，资料来自Journal of Wuhan University of Technology(Materials Science)2019年04期论文网站，若本站收录的文献无意侵犯了您的著作版权，请联系我们删除。
标签：Journal of Wuhan University of Technology(Materials Science)2019年04期论文;
孟晓凯：Effect of Dy Addition on the Microstructure and Mechanical Property of Ti-Nb-Dy Alloys论文
下载Doc文档