:Injection Molding Optimization of Plastic Parts Based on Three-dimensional Reconstruction and Finite Element Analysis论文

:Injection Molding Optimization of Plastic Parts Based on Three-dimensional Reconstruction and Finite Element Analysis论文

本文主要研究内容

作者(2019)在《Injection Molding Optimization of Plastic Parts Based on Three-dimensional Reconstruction and Finite Element Analysis》一文中研究指出:In order to solve the problems on the holes caused by various factors in the 3D model, which have brought difficulties to the subsequent operation of the 3 D model, a 3D hole repair method based on cu

Abstract

In order to solve the problems on the holes caused by various factors in the 3D model, which have brought difficulties to the subsequent operation of the 3 D model, a 3D hole repair method based on cu

论文参考文献

  • [1].Reliability of two-dissimilar-unit parallel system with delay in repair[A]. GAO Chao~1,QIAO Xing~(*2),MA Dan~2 1.Beijing Institute of Information and Control,Beijing 100037,P.R.China 2.School of Mathematical Sciences,Daqing Normal University,Daqing 163712,P.R.China.第三十一届中国控制会议论文集A卷[C]. 2012
  • [2].Minimization of length and curvature on planar curves[A]. Ugo Boscain,Grégoire Charlot,Francesco Rossi.Proceedings of Joint 48th IEEE Conference on Decision and Control and 28th Chinese Control Conference(5)[C]. 2009
  • [3].Accurate Curvature Approximation of 3-Dimension Discrete Points[A]. Shilin Zhou,Jianping Yin,Xiaolin Yang,Junyun Wu.Electronics and Signal Processing(EEIC 2011 LNEE V4)[C]. 2011
  • [4].Short-time Existence of Inverse Mean Curvature Flow with External Force Field[A]. Yannan Liu Department of Applied Mathematics,Beijing Technology and Business University,Beijing 100048,P.R.China.2010 Information and Management Sciences--Processings of the Ninth International Conference on Information and Management Sciences[C]. 2010
  • [5].Development of an instrument for measuring curvature of lens[A]. Chilie Tan,Bin Lin,Bo Chen,Xiangqun Cao,Taicai Pan,Wei Jin State Key Laboratory of Modern Optical Instrumentation,Zhejiang University,Hangzhou 310027 NERC for Optical Instruments,Zhejiang University,Hangzhou,310027 China.Optical Test and Measurement Technology and Equipment(Part One)--Proceedings of the 2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies[C]. 2005
  • [6].Plane Curve of Scheduled Relative Curvature[A]. Chaowu Zhu Sanmenxia Polytechnic,472000,Sanmenxia,China.Lecture Notes in Information Technology—Proceedings of 2012 International Conference on Technology and Management(ICTAM 2012)[C]. 2012
  • [7].Study on Statistical Model of Reparable System Failure Data[A]. Qingtian Han Control Engineering Department Naval Aeronautical and Astronautical University Yantai,China Xiaoyan Gao Information Engineering Department Shandong Business Institute Yantai,china.Proceedings of 2009 Second International Workshop on Knowledge Discovery and Data Mining[C]. 2009
  • [8].Submanifolds with Moebius sectional curvature in a unit sphere[A]. Kaiwen Guo.Proceedings of 2011 2nd Asia-Pacific Conference on Wearable Computing Systems(APWCS 2011 V4)[C]. 2011
  • [9].Submanifolds with Moebius sectional curvature in a unit sphere[A]. Kaiwen Guo.2011 International Conference on Control, Automation and Systems Engineering(CASE 2011 V1)[C]. 2011
  • [10].Complete classification of compact four-manifolds with positive isotropic curvature[A]. Binglong Chen (Sun Yat-sen University).Proceedings of International Conference on Geometric and Complex Analysis[C]. 2010
  • 论文详细介绍

    论文作者分别是来自2019 2nd International Conference on Computer Science and Advanced Materials(CSAM 2019)的,发表于刊物2019 2nd International Conference on Computer Science and Advanced Materials(CSAM 2019)2019-02-16论文,是一篇关于,2019 2nd International Conference on Computer Science and Advanced Materials(CSAM 2019)2019-02-16论文的文章。本文可供学术参考使用,各位学者可以免费参考阅读下载,文章观点不代表本站观点,资料来自2019 2nd International Conference on Computer Science and Advanced Materials(CSAM 2019)2019-02-16论文网站,若本站收录的文献无意侵犯了您的著作版权,请联系我们删除。

    标签:;  

    :Injection Molding Optimization of Plastic Parts Based on Three-dimensional Reconstruction and Finite Element Analysis论文
    下载Doc文档

    猜你喜欢