本文主要研究内容
作者（2019）在《Submersible direct-drive progressing cavity pump rodless lifting technology》一文中研究指出：Submersible electrical motor direct-drive progressing cavity pump(PCP) rodless lifting was studied to solve the traditional rod-drive pump problems, such as rod-tubing wearing, low efficiency and short running time. The theoretical researches and laboratory experiments of key tools such as submersible motor and the construction technology of lifting system were introduced. The field application and economic benefit were analyzed and compared with the traditional rod pumping unit. A new low speed and large torque permanent magnet synchronous motor was developed. This motor was used to drive PCP without gear reducer, which improved the reliability and feasibility. It can run at the speed from 50 to 500 r/min with stepless speed regulation, and it can perform high efficiency and large torque. Besides, other key supporting tools, such as motor protector and flex shaft, were developed. The submersible electrical motor direct-drive PCP technology can be used in a 139.7 mm(5.5 in) casing well, with daily output ranging from 5 to 50 m~3. Until now, the technology has been deployed more than 100 wells. The field application results show that it eliminates the rod-tubing wearing and saves electric energy by more than 30% compared with the traditional rod pumping unit. And it also makes the oil produced in a safe and environmental friendly way.
Abstract
Submersible electrical motor direct-drive progressing cavity pump(PCP) rodless lifting was studied to solve the traditional rod-drive pump problems, such as rod-tubing wearing, low efficiency and short running time. The theoretical researches and laboratory experiments of key tools such as submersible motor and the construction technology of lifting system were introduced. The field application and economic benefit were analyzed and compared with the traditional rod pumping unit. A new low speed and large torque permanent magnet synchronous motor was developed. This motor was used to drive PCP without gear reducer, which improved the reliability and feasibility. It can run at the speed from 50 to 500 r/min with stepless speed regulation, and it can perform high efficiency and large torque. Besides, other key supporting tools, such as motor protector and flex shaft, were developed. The submersible electrical motor direct-drive PCP technology can be used in a 139.7 mm(5.5 in) casing well, with daily output ranging from 5 to 50 m~3. Until now, the technology has been deployed more than 100 wells. The field application results show that it eliminates the rod-tubing wearing and saves electric energy by more than 30% compared with the traditional rod pumping unit. And it also makes the oil produced in a safe and environmental friendly way.
论文参考文献
论文详细介绍
论文作者分别是来自Petroleum Exploration and Development的，发表于刊物Petroleum Exploration and Development2019年03期论文，是一篇关于,Petroleum Exploration and Development2019年03期论文的文章。本文可供学术参考使用，各位学者可以免费参考阅读下载，文章观点不代表本站观点，资料来自Petroleum Exploration and Development2019年03期论文网站，若本站收录的文献无意侵犯了您的著作版权，请联系我们删除。