本文主要研究内容
作者（2019）在《Synthesis and graphitization of resole resins by ferrocene》一文中研究指出：Commercial(Rs) and laboratory synthesized resoles(LSRs) containing 3–5 wt% ferrocene have been used to study the development of thermosetting resin compositions as binder materials for carbon-containing refractories(CCRs) production. The LSRs were developed based on formaldehyde to phenol 1.5 mol.%(1.5 Rs) and 2.0 mol.%(2 Rs). Microstructure and oxidation resistance of carbons derived from plain and modified resins have been compared. Chemical structure of the resins was studied using Fourier Transform InfraRed-Attenuated Total Reflection(FTIR-ATR) spectroscopy. X-ray Photoelectron spectroscopy was used to examine chemical changes during heat treatment of the modified products. Flow behavior of plain and formulated resins has been measured under isothermal condition. Rheology measurement results show that the selected amount of ferrocene did not affect the resin near-Newtonian fluid behavior and processability during refractory production. X-ray diffraction(XRD) analysis and transmission Electron Microscope(TEM) were used to characterize the derived carbon samples after thermal treatment of the resins. The results demonstrate that ferrocene is an excellent additive for crystallizing resoles carbon. The presence of fringes in TEM images indicates the graphitized carbon microstructure. The carbon reactivity in an oxidizing environment was also determined via thermogravimetric analyzer(TGA). Several factors, such as bond strength and atoms arrangement, have been found to control the carbonized modified-resin oxidation resistance.
Abstract
Commercial(Rs) and laboratory synthesized resoles(LSRs) containing 3–5 wt% ferrocene have been used to study the development of thermosetting resin compositions as binder materials for carbon-containing refractories(CCRs) production. The LSRs were developed based on formaldehyde to phenol 1.5 mol.%(1.5 Rs) and 2.0 mol.%(2 Rs). Microstructure and oxidation resistance of carbons derived from plain and modified resins have been compared. Chemical structure of the resins was studied using Fourier Transform InfraRed-Attenuated Total Reflection(FTIR-ATR) spectroscopy. X-ray Photoelectron spectroscopy was used to examine chemical changes during heat treatment of the modified products. Flow behavior of plain and formulated resins has been measured under isothermal condition. Rheology measurement results show that the selected amount of ferrocene did not affect the resin near-Newtonian fluid behavior and processability during refractory production. X-ray diffraction(XRD) analysis and transmission Electron Microscope(TEM) were used to characterize the derived carbon samples after thermal treatment of the resins. The results demonstrate that ferrocene is an excellent additive for crystallizing resoles carbon. The presence of fringes in TEM images indicates the graphitized carbon microstructure. The carbon reactivity in an oxidizing environment was also determined via thermogravimetric analyzer(TGA). Several factors, such as bond strength and atoms arrangement, have been found to control the carbonized modified-resin oxidation resistance.
论文参考文献
论文详细介绍
论文作者分别是来自Progress in Natural Science:Materials International的，发表于刊物Progress in Natural Science:Materials International2019年01期论文，是一篇关于,Progress in Natural Science:Materials International2019年01期论文的文章。本文可供学术参考使用，各位学者可以免费参考阅读下载，文章观点不代表本站观点，资料来自Progress in Natural Science:Materials International2019年01期论文网站，若本站收录的文献无意侵犯了您的著作版权，请联系我们删除。
标签：Progress in Natural Science:Materials International2019年01期论文;