本文主要研究内容
作者（2019）在《Formation of the front-gradient bandgap in the Ag doped CZTSe thin films and solar cells》一文中研究指出：The graded bandgap of kesterite based absorber layer is an important way to achieve high efficiency solar cells. Incorporation of Ag into CZTSSe thin films can adjust the bandgap and thus reduce the VOC-deficit and improve the quality of crystallization. However, the distribution of Ag is difficult to control due to the quick diffusion of Ag under the high temperature. In this study, we achieve the front Ag-gradient in kesterite structured compound films by prealloying followed by selenization process at 550 °C. AgZn3,Ag3Sn, and Sn–Ag–Cu alloy phases were formed during prealloying stage at 250 °C. After prealloying process, Ag tends to distribute at the front surface of the ACZTSe thin films. Combining the results of experiment and SCAPS simulation, the significantly VOCimprovement of devices is ascribed to the formation of the front Ag-gradient bandgap structure in the absorber layer. This facile prealloying selenization process affords a feasible method to design the graded bandgap structure absorber layers, which will promote the fabrication of high efficient graded bandgap structure solar cells.
Abstract
The graded bandgap of kesterite based absorber layer is an important way to achieve high efficiency solar cells. Incorporation of Ag into CZTSSe thin films can adjust the bandgap and thus reduce the VOC-deficit and improve the quality of crystallization. However, the distribution of Ag is difficult to control due to the quick diffusion of Ag under the high temperature. In this study, we achieve the front Ag-gradient in kesterite structured compound films by prealloying followed by selenization process at 550 °C. AgZn3,Ag3Sn, and Sn–Ag–Cu alloy phases were formed during prealloying stage at 250 °C. After prealloying process, Ag tends to distribute at the front surface of the ACZTSe thin films. Combining the results of experiment and SCAPS simulation, the significantly VOCimprovement of devices is ascribed to the formation of the front Ag-gradient bandgap structure in the absorber layer. This facile prealloying selenization process affords a feasible method to design the graded bandgap structure absorber layers, which will promote the fabrication of high efficient graded bandgap structure solar cells.
论文参考文献
论文详细介绍
论文作者分别是来自Journal of Energy Chemistry的，发表于刊物Journal of Energy Chemistry2019年08期论文，是一篇关于,Journal of Energy Chemistry2019年08期论文的文章。本文可供学术参考使用，各位学者可以免费参考阅读下载，文章观点不代表本站观点，资料来自Journal of Energy Chemistry2019年08期论文网站，若本站收录的文献无意侵犯了您的著作版权，请联系我们删除。